13
10. SENSOR CALIBRATION
1
8-10 Seconds
8-10 Seconds
If the range of the motion sensor is not desirable,
press and hold the calibration button on the side
of tank (water will run for 8-10 seconds then stop).
2
3
2
4
1
Release button and place a hand in the desired
sensor activation location. Wait for 5 seconds
until the red LED on the sensor turns off.
Test the new activation location by placing
a hand in front of the sensor.
Press and hold the calibration button (located
on the side of tank.) The water will run for
8-10 seconds then stop.
After water stops, release calibation button
and place a hand in the desired sensor
activation location.
Wait for 5 seconds until the red LED on the
sensor turns off.
Test the new activation location by placing a
hand in front of the sensor.
5 Seconds
5 Seconds
B
A
