10
5. CONNECT FAUCET TO TANK
PROPERTY DAMAGE
• Pinched or blocked water lines may cause
damage to the tank.
• Check to make sure tubes are connected properly
and are pushed down as far as possible.
NOTICE
1
8
Connect cold water hose to tank fitting. Secure
connection using a wrench while tightening the hose.
2
9
Insert tubing into fitting from the faucet hose and
press until it bottoms out. Pull on connections to
insure tubes are fully seated. Tube should insert
approximately 5/8".
10
Connect sensor from faucet to sensor from tank.
Be sure to align arrows on connectors.
6. CONNECT DRAINAGE PIPE
A
B
C
6"
6"
1
11
2
Install a 3/4" inside diameter discharge pipe to
the T&P Valve (sloped for proper drainage). The
discharge pipe should be terminated within 6"
from the floor at a suitable place for disposal.
D
