background image

INSINGER MACHINE COMPANY LIMITED WARRANTY

PART 1   TECHNICAL INFORMATION

to perform normal and routine maintenance 

as set out in  the instruction booklet (operating 

instructions) or for improper operation or failure to 

follow normal operating instructions (as set out in 

the instruction booklet). Insinger is not responsible 

nor liable for any conditions of erosion or corrosion 

caused by corrosive detergents, acids, lye or other 

chemicals used in the washing and or cleaning 

process.
Service must be done by either Insinger Appointed 

Service Agencies or agencies receiving prior 

authorization from Insinger. 
All warranty work must be done during normal 

working hours, unless purchaser receives prior 

authorization from Insinger.
There are no other express warrants except 

as set forth herein and any applicable implied 

warranties  of  merchantability  and  fitness  are 

limited in duration to the period of coverage of 

this express written limited warranty. This limited 

warranty   supersedes all other express warranties, 

implied warranties of merchant-ability and fitness 

or limited warranties as of this date, January 1, 

1998. Some states do not allow limitation on how 

long  an implied warranty lasts so this limitation 

may not apply to you.
Insinger is not liable for any special, indirect or 

consequential damages. Some states do not 

allow the exclusion or limitation of incidental or 

consequential damages, so this limitation nor 

exclusion may not apply to you.
Insinger does not authorize any person or company 

to assume for it any other obligation or liability in 

connection with the sale, installation, use, removal, 

return or replacement of its equipment: and no 

such representations are binding on Insinger. 

Insinger Machine Company, Inc. (Insinger) hereby 

warrants to the original retail purchaser of this 

Insinger Machine Company, Inc. product, that if 

it is assembled and operated in accordance with 

the printed instructions accompanying it, then 

for a  period of either 15 months from the date 

of shipment from Insinger or 1 year (12 months) 

from the date of installation or start-up that said 

Insinger product shall be free from defects in 

material and workmanship. Whichever one of the 

two aforestated limited warranty time periods is the 

shortest shall be the applicable limited warranty 

coverage time period.
Insinger may require reasonable proof of your 

date of purchase; therefore, you should retain 

your copy of invoice or shipping document.
This limited warranty shall be limited to the repair or 

replacement of parts which prove defective under 

normal use and service and which on examination 

shall indicate, to Insinger’s satisfaction, they 

are defective. Any part that is claimed to be 

defective and covered by this limited warranty 

must be returned to Insinger. An RMA# must be 

obtained from the Insinger Warranty Department 

before returning any material. Return may be 

done through an Authorized Service Agency. 

Furnish serial number of machine and RMA # with 

shipment and send to:
Insinger Machine Company

6245 State Road

Philadelphia, PA 19135-2996

If  Insinger’s  inspection  confirms  the  defect  and 

the claim, Insinger will repair or replace such 

part without charge and return it to you freight or 

postage prepaid.
This limited warranty does not cover any failure or 

accident, abuse, misuse, alteration, misapplication, 

improper  installation,  fire,  flood,  acts  of  God 

or improper maintenance or service, or failure    

          

4

®

TRAC 878 Technical Manual 2018

www.insingermachine.com    800-344-4802

Summary of Contents for TRAC 878




























































Reviews: