3M 09/06
PRINTED IN USA
Information and specifications subject to change without notice
Capacity
per hour
Final rinse
consumption
at 20 psi
Exhaust hood
requirements
Peak rate
drain flow
Shipping
weight
Current draw
amps
Steam
Electric
w/o booster
Tank capacity
Motor size
Electric usage
Final rinse
peak flow
at 20 psi min.
8250 dishes
400-800 meals
330 racks
239 gals./hr.
0.72 gals./rack
350 CFM Load
350 CFM Unload
23 gals./min.
1400 lbs.
14 gals. (pre wash)
25 gals. (wash)
25 gals. (rinse)
1/2 hp (pre wash)
1
1
/
2
hp (wash)
1
1
/
2
hp (rinse)
1/6 hp (conveyor)
7.5 kw wash tank
22.5 kw rinse tank
27.0 kw booster 40° rise
45.0 kw booster 70° rise
108 lbs./hr tank
84 lbs./hr booster 40° rise
147 lbs./hr booster 70° rise 3.98 gals./min.
Steam
consumption at
20 psi min.
208/3/60 ................... 18.5 ............................. 101.8
230/1/60 ................... 28.6 ............................. 153.7
230/3/60 ................... 16.8 ............................. ..88.9
380/3/50 ................... 10.1 ............................. ..55.7
460/3/60 ..................... 8.4. ............................ ..44.5
SUPER 106-2
CSI
-
11400
Note: For all rough in connections see Installation and Layout Detail Drawing.
SPECIFICATIONS
CONSTRUCTION -
Hood and tank constructed of 16 gauge 18-8 type 304 S/S. Hood unit of all welded seamless construction. S/S
frame , legs and feet. All internal castings are non-corrosive nickel alloy, bronze or S/S investment.
DOORS -
Three extra large die formed 18-8 type 304 S/S front inspection doors riding in all S/S channels. A triple ply leading edge on
the door channels made of S/S with no plastic or nylon sleeves or liners used. Two intermediate S/S door-safety stops on each door.
CONVEYOR -
Two S/S roller conveyor chains with rack inter-locking S/S lugs running along the front and rear of the machine. Conveyor
accommodates all standard 20”x 20” racks. Conveyor drive system includes direct drive gear motor with frictionless, trouble-free clutch
system, spring-loaded and automatically re-engaging. Racks conveyed automatically through washing and rinsing systems powered by
an independent 1/6 HP conveyor motor.
PUMPS -
Centrifugal type “packless” pump with a brass petcock drain. Construction includes ceramic seal and a balanced cast impeller
on a precision ground stainless steel shaft. All working parts mounted as an assembly and removable as a unit without disturbing pump
housing. Two 1
1
/
2
HP motors, wash and rinse: and 1/2 HP, pre-wash; standard horizontal C-face frame, drip proof, internally cooled with
ball-bearing construction.
CONTROLS -
Top-mounted control cabinet, NEMA 12 rated with heat insulation provided between hood and control cabinet, housing
motor controls and overload protection, transformer, contactors and all dishwasher integral controls. All controls safe low voltage 24 VAC.
ENERGY SAVER -
Rack actuated lever automatically operates the final rinse solenoid only when a rack passes, saving water and
energy. The lever also activates an adjustable timer control. If no rack passes during the set time, the machine shuts down.
SPRAY SYSTEM -
Spray arms are made of 18-8 type 304 stainless steel pipe. Spray assemblies removable without the use of tools.
PREWASH -
Two spray pipes with 3 power nozzles each. The arms are offset for complete prewashing.
WASH -
Upper and lower manifolds & CrossFire® Wash System (patented). One manifold above with 3 power wash arms each
designed with 7 high pressure action cleansing slots and one manifold below with 3 power wash arms each designed with 14 high
pressure action cleansing slots. The slots are precision milled for water control producing a fan spray. Wash arms are fillet welded to the
S/S manifold. The CrossFire® system provides 4 horizontally spraying high pressure nozzles.
RINSE -
Upper and lower manifolds. One manifold above with 3 power rinse arms, each designed with 7 high pressure action cleans-
ing slots and one manifold below with 3 power rinse arms, each designed with 14 high pressure action cleansing slots. The slots are
precision milled for water control, producing a fan spray. Rinse arms are fillet welded to the S/S manifold.
FINAL RINSE -
Three nozzles above and three nozzles below threaded into S/S schedule 40 pipes. Nozzles produce a fan spray
reducing water consumption, maximizing heat retention.
DRAIN -
Drain valves externally controlled. Overflow assemblies with skimmer caps are removable without use of tools for drain line
inspection. Heaters protected by low water level control.
