Insinger Eliminator 900, Technical Manual

Page: 4 / 44

Pulper DOC PULPER 1.0 06
www.insingermachine.com 800-344-4802
2
WASTE HANDLING SYSTEMS
Safety Summary
The following are general safety precautions that
are not related to any specific procedures. These
are recommended precautions that personnel must
understand and apply during many phases of
operation and maintenance.
Power Down
Always disconnect main power feeding the ma-
chine when doing any type of cleaning or mainte-
nance in the pulping chamber or main electrical
control box.
Lock Out/Tag Out refers to the specific practice and
procedures to safeguard employees from the unex-
pected energization or startup of machinery and
equipment, or the release of hazardous energy dur-
ing cleaning, service or maintenance activities.
Keep Away From Live Circuits
Operating personnel must at all times observe all
safety regulations. Do not replace components or
make adjustments inside the equipment with the
high voltage supply turned on. Under certain con-
ditions, dangerous potentials may exist when the
power control is in the off position. To avoid casu-
alties, always remove power, red tag machine and
ground a circuit before touching it.
PART 1 TECHNICAL INFORMATION
WARNING:
Power Down before Cleaning or Serving!
!
þ
NOTE:
Use LockOut/Tagout (LOTO) to prevent
injuries during cleaning or maintenance..
Do Not Service or Adjust Alone
Under no circumstances should any person reach
into or enter the enclosure for the purpose of ser-
vicing or adjusting the equipment except in the
presence of someone who is capable of rendering
aid.
Resuscitation
Personnel working with or near high voltages
should be familiar with modern methods of resusci-
tation. Such information may be obtained from the
Bureau of Medicine and Surgery.