22
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
Before you start
Before you start installing your dryer, make sure that:
• The location you selected has a grounded electrical outlet. See Grounding
requirements on page 20.
• For U.S. models, you have the correct type power cord (not included). See
Electric requirements on page 17.
Note:
For Canadian models, the power cord comes pre-installed.
• Your exhaust ducting (not included) is made of rigid metal or semi-rigid
metal. See Duct requirements on page 16.
• You have a 3/8” gas dryer gas line (if you are installing a gas dryer) that meets
all national and local codes.
Step-by-step instructions
Step 1: Make sure that the floor is a solid, level surface
• Use a level to make sure that the floor where you are installing your dryer is
level. This helps minimize vibration, noise, and unwanted movement.
Step 2: Move your dryer to the location you selected
• Move your dryer to the location you selected, but do not push your dryer all
the way back into the location. You need to connect the power cord and
ducting before you move your dryer into its final position.
Note:
If a gas dryer is being installed, you will need to call a licensed
professional to do the installation.
Note:
If the front of the dryer is higher than the rear by more than one degree,
it may take longer to dry small loads. You can adjust the dryer feet to level your
dryer (Step 3: Connect the exhaust ducting on page 23).
Tip:
For information about space requirements for a side-by-side installation,
see Installing your dryer and washer side-by-side on page 13.
