10
www.insigniaproducts.com
7
Hang the hanging brackets
B
on the bottom of the aluminum frame, then
slide the brackets so they align with the
A
brackets. The distance between the
brackets
B
should be the same as the distance you used for the brackets
A
.
8
Mark the screw holes in the brackets
B
, then drill pilot holes through the screw
holes on the brackets and into the wall with a drill with an 8 mm bit.
9
Insert a plastic anchor into each screw hole you drilled. Make sure that the
anchor is flush with the wall. If needed, tap the anchors with a mallet or
hammer.
10
Secure the brackets
B
to the wall with one screw per bracket.
Maintaining your screen
• Use soft brush or wet cloth to clean the screen surface.
• Don't clean the screen surface with corrosive detergents. Wipe the screen
surface with a non-corrosive detergent.
Moving your screen
• Have two people move your projector screen, one on
each side.
• Make sure that the screen stays level during moving.
• Don’t twist the frame.
Note:
Make sure that you attach the brackets
B
to the aluminum frame first,
then secure the brackets to the wall.
