9
Projector Screen
www.insigniaproducts.com
Step 4 – Hang your projector screen
You’ll need
1
Align one of the hanging brackets
A
on the wall where you want to install the
top of your projector screen. Make sure that the top of the bracket is level on
the wall.
2
Drill pilot holes through the screw holes on the bracket and into the wall with
a drill with an 8 mm bit.
3
Insert a plastic anchor into each screw hole you drilled. Make sure that the
anchor is flush with the wall. If needed, tap the anchors with a hammer or
mallet.
4
Secure the bracket to the wall with two of the Bakelite screws.
5
Install the other hanging bracket
A
. Make sure that the tops of both brackets
are level with each other.
6
Hang the top of the your projector screen on the
A
brackets.
Phillips screwdriver
Drill with 8 mm bit
Pencil
Hanging bracket A (2)
Hanging bracket B (2)
Bakelite screws (6)
Plastic anchors (6)
Hammer or mallet
The distance between the hanging brackets
A
should be
100 in. model: More that 4.8 (1.45 m) and less than 5.9 ft. (1.8 m).
120 in. model: More than 5.7 ft. (1.75 m) and less than 6.6 ft. (2 m).
1.2 in.
(3 cm)
