40
NS-RNE4BWH8-C/NS-RNE4BSS8-C
www.insigniaproducts.com
Metal Marks and Scratches
1
Be careful not to slide pots and pans across your cooktop. It will leave
metal markings on the cooktop surface.
These marks are removable using the Ceramic Cooktop Cleaner with
the Cleaning Pad for Ceramic Cooktops.
2
If pots with a thin overlay of aluminum or copper are allowed to boil
dry, the overlay may leave black discoloration on the cooktop.
This should be removed immediately before heating again or the
discoloration may be permanent.
WARNING:
Carefully check the bottom of pans for
roughness that would scratch the cooktop.
Cooktop Seal
To clean the cooktop seal around the edges of the glass, lay a wet cloth on
it for a few minutes, then wipe clean with nonabrasive cleaners.
Glass surface – potential for permanent
damage.
Damage from Sugary Spills and Melted Plastic
1
Turn off all surface units. Remove hot pans.
2
Wearing an oven mitt:
•
Use a single-edge razor blade scraper to move the spill to a cool area
on the cooktop.
•
Remove the spill with paper towels.
3
Any remaining spillover should be left until the surface of the cooktop
has cooled.
4
Don't use the surface units again until all of the residue has been
completely removed.
Note
If pitting or indentation in the glass surface has already occurred,
the cooktop glass will have to be replaced. In this case, service
will be necessary.
NS-RNE4BWH8-C_17-0680_User MAN_V2_ENG.fm Page 40 Monday, September 18, 2017 1:12 PM