Insignia NS-PMM6230, Assembly Manual, Page: 6 / 16

www.insigniaproducts.com 6
Hardware
Make sure that you have all the hardware necessary to assemble your new monitor mount:
VESA mount patterns
Your monitor mount works with the following VESA screw hole patterns:
• 75 × 75 mm (3 × 3")
• 100 × 100 mm (3.9 × 3.9")
Installation instructions
STEP 1: Preparing the monitors
1 Make sure that the monitors have screw holes on the backs for VESA mounting. You can use monitors with VESA
mounting patterns of 75 × 75 mm (3 × 3") or 100 × 100 mm (3.9 × 3.9").
2 Remove the bases or stands from the monitors.
Note: You may not use all the included hardware.
Ltr. HARDWARE QTY. Ltr. HARDWARE QTY.
A M4 × 12 mm mounting screw 8 F M10 × 20 mm screw 1
B M5 × 12 mm mounting screw 8 G M6 × 10 mm screw 2
C M4 × 10 mm screw 1 H 6 × 6 Allen wrench 1
D 3 × 3 Allen wrench 1 I 4 × 4 mm Allen wrench 1
E M4 × 16 mm screw 1
75 × 75 mm (3 × 3") or
100 × 100 mm (3.9 × 3.9")
75 × 75 mm (3 × 3") or
100 × 100 mm (3.9 × 3.9")