www.insigniaproducts.com
10
4
Slide the decorative cover (
8
) all the way down the support tube until it covers the base support plate.
5
Attach the bottom plate (
14
) to the bottom of the base plate using the four screws you removed in step 1.
6
Cover the screw heads with the padded mat feet (
15
), then place the top mounting assembly over the grommet hole.
7
From underneath the desk, insert the tightening knob (
17
) through the M10 nut (
13
), the mounting plate (
16
), and into
the grommet hole.
8
Position the mounting plate off center to allow space for the cables to pass through, then tighten the knob (
17
)
through the mounting plate (
16
) and the desk and into the bottom plate (
14
) until the monitor mount is secure,
adjusting the nut (
13
) as necessary.