www.insigniaproducts.com
11
NS-PMM6230
STEP 3: Attaching the monitor support arms
As you decide where to position the monitor support arms, remember the tops of the monitors should be level with your
eyes.
1
Make sure that the wider opening on one of the arm support rings (
5
) is facing up, then place the ring on the support
tube at the level you want the mounting plate and support arm. Use a Phillips screwdriver to tighten the pre-installed
screw in the ring to hold the ring in place.
2
Slide one of the monitor plate and support arm assemblies (
1
or
4
) onto the support tube, making sure that the curved
portions of the arm are pointed down. Tighten the arm knob to secure the arm.
3
Slide the fixed ring (
2
) onto the support tube just above the arm support you installed in step 2. Use a Phillips
screwdriver to tighten the screw in the ring to hold the ring in place.
Note:
You need a Phillips screwdriver for this step.