background image

3

www.insigniaproducts.com

ii

The floppy drive power connector to the 

floppy drive.

iii

The Serial ATA connectors (4) to any 

computer components that have a Serial 
ATA connector, such as a CD/DVD/Blu-ray 
or hard drive.

iv

The 8-pin PCI-E or 6-pin PCI-E connector 

to a PCI-E graphic card.

Caution

: Make sure that all connectors are securely connected. 

Incorrect connections could prevent your computer from starting 
and could damage some components.

5

Close your computer case.

6

Connect the AC power cord to the power 
supply, then to a surge protector or wall outlet.

7

Turn on your computer by pressing the power 
button on the front of the case.

Note:

 For more information, refer to your computer’s user guide.

Connector types

Troubleshooting

If your new power supply is not working correctly, 
try the following:
• Make sure that the computer power cord is firmly 

plugged into the power cord connector on your 
computer.

• If you are using a surge protector, make sure that 

it is plugged in and turned on.

• Make sure that the wall outlet is supplying power. 

For example, plug a lamp into the outlet and turn 
it on.

• If you have the NS-PCW4050/NS-PCW4050-C, 

make sure that the red voltage switch (located on 
the back of the power supply) is set to the correct 
voltage setting. The setting for the United States 
is 115 V. The setting for Europe and other 
countries is 230 V.

Connector

Illustration

Connect to

20+4-PIN Main Power

The motherboard

4-PIN+ 12V - 

(400 Watt PS only)

The motherboard (for 
CPU power)

-------------------------------OR-----------------------------------

8-PIN (4+4) + 12V - 

(520 Watt PS only)

The motherboard (for 
CPU power)

4-PIN peripheral - 

Total 3 connectors

Internal IDE drives

Serial ATA (SATA) -

Total 4 connectors

Internal SATA drives

Floppy drive

3.25” floppy drive

6-PIN PCI-E

(400 Watt PS only)

PCI Express card (such as 
a graphics card) that 
requires power

------------------------------OR--------------------------------------

8-PIN PCI-E

(520 Watt PS only)

PCI Express card (such as 
a graphics card) that 
requires power

NS-PCW4050-NS-PCW5250_14-0324_MAN_V1_ENG.book  Page 3  Tuesday, April 1, 2014  7:30 AM

Summary of Contents for NS-PCW4050









Reviews: