V1 ENGLISH 20-0035
Device charges slowly
• Your device may charge more slowly with the charging pad than
a charging cable. This is normal behavior.
• Make sure that your device is positioned in the center of your
charging pad.
CAUTION:
Only use the cable with the attached power adapter
that came with your charger. Using a different cable and adapter
can decrease charging performance or damage your charger
.
SPECIFICATIONS
Qi wireless charging pad
Input: Micro USB 5 V/2 A
Wireless
output:
5
W
Dimensions: 3.937 x 3.937 x 0.417 in. (95 x 95 x 10.6 mm)
AC power adapter:
Input: 100-240 V 50/60 HZ
Output: DC 5 V/2.4 A
Charging cable:
4 ft. (1.2 m)
LEGAL NOTICES
FCC Information
FCC Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RSS-Gen statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
RF exposure statement: This equipment complies with radio frequency exposure limits set forth by the FCC for an
uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm
between the device and the user or bystanders. This device must not be co-located or operating in conjunction with
any other antenna or transmitter. This equipment complies with radio frequency exposure limits set forth by the
Innovation, Science and Economic Development Canada for an uncontrolled environment . This equipment should
be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. This
device must not be co-located or operating in conjunction with any other antenna or transmitter.
SAFETY INFORMATION
1
Do not attempt to disassemble the product. It may result in
short-circuit or damage.
2
The product should be kept in a dry and ventilated environment.
Do not store it in an area of high humidity and high temperature.
3
Do not use an organic solvent to clean the product.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
1-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
LED INDICATOR STATUS
TROUBLESHOOTING
Device not charging/LED is red
• Make sure that your device is Qi-enabled.
• Make sure that your charging pad is connected to a
working power outlet.
• Make sure that your device is positioned correctly
on your charging pad.
• Make sure that there are no other objects on the charging pad.
• Remove your device’s case. It may be blocking the wireless signal.
LED
STATUS
Standby
Charging
Charging error
Insufficient input power
Blinking blue
Solid blue
Blinking red
Solid red
