7
10" Steam Iron
www.insigniaproducts.com
Using the Burst of Steam
This feature provides an extra amount of steam to help remove stubborn wrinkles.
1
Open the water inlet cover and fill the iron with water.
2
Stand the iron upright and plug it in.
3
Turn the temperature control dial to the maximum setting.
4
The temperature indicator turns off when the temperature you want is reached. The
iron is ready for use.
5
Press the Burst of Steam pump. Steam penetrates the garment and removes
stubborn wrinkles.
6
Press the Burst of Steam pump a second or third time. Usually, all wrinkles can be
removed within three steam bursts. For best results, wait three seconds between
each burst.
Cleaning and maintaining your iron
Using the self-clean function
You can use the self-clean function to remove scale and impurities from your iron. The
self-clean function should be used approximately once every two weeks. If the water in
your area is very hard, the self-clean function should be used more frequently.
1
Unplug the iron.
2
Set the steam control knob to the self-clean position.
3
Open the water inlet cover and fill the iron with water.
4
Select the maximum ironing temperature.
5
Plug in the iron.
6
When the temperature indicator turns off, unplug the iron.
7
Hold the iron over the sink, then press and hold the self-clean button and gently
shake the iron. Steam and boiling water come out of the sole plate and any impurities
and flakes are flushed out.
8
Release the self-clean button as soon as all water in the reservoir has been drained.
9
Repeat the self-clean process if the iron still contains a lot of impurities.
Cleaning the exterior of your iron
Turn the temperature control dial to OFF, then unplug the iron and let it cool down
completely. Deposits and other residues on the sole plate can be removed with a cloth
soaked in a vinegar/water solution.
The casing may the wiped with a damp cloth and then polished with a dry one.
Note:
In addition to a self-clean function, your iron features an anti-scale cartridge,
which reduces scale deposits in the iron and prolongs its operational life. The anti-scale
system is an integral part of your iron and does not require any maintenance.
Notes:
• Never use any abrasives to clean the sole plate.
• Keep the sole plate smooth. Avoid contact with metal objects.