3
10" Steam Iron
www.insigniaproducts.com
5
Always disconnect the iron from the electrical outlet before filling the iron with water,
emptying the water from the iron, and when the iron is not in use.
6
Do not operate the iron with a damaged cord or in the event the iron has been
dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron.
Take it to a qualified serviceman for examination and repair. Incorrect assembly
might result in a risk of electric shock when the iron is used after reassembly.
7
Close supervision is required for the iron used by or near children.
8
Burns can occur from touching hot metal parts, hot water, or steam. Use caution
when you turn a STEAM IRON upside down – there might be hot water in the
reservoir.
9
To avoid a circuit overload, do not operate an iron on the same circuit with another
high wattage appliance.
10
The iron must not be left unattended while it is plugged in.
11
The filling aperture must not be opened during use. Instructions for the safe refilling
of the water reservoir shall be given.
12
The iron must be used and rested on a stable surface.
13
When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
14
The iron is not to be used if it has been dropped, if there are visible signs of damage,
or if it is leaking.
15
Never use an extension power cord set that is not approved by a competent
authority. If an extension cord is absolutely necessary, a cord with an ampere rating
equal to or greater than the 15A shall be used. A cord rated for less amperage may
overheat. Care shall be taken to arrange the cord so that it cannot be pulled or the
iron tripped over.
SAVE THESE INSTRUCTIONS