background image

www.insigniaproducts.com

20

60" Espresso TV Stand

ONE-YEAR LIMITED WARRANTY

Definitions:

The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the 
Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase 
of the Product (“Warranty Period”).
For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded retail store or online at 
www.bestbuy.com or www.bestbuy.ca, and is packaged with this warranty statement.

How long does the coverage last?

The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received 
with the Product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized 
Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at 
no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are 
not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This 
warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the 
Product.

How to obtain warranty service?

If you purchased the Product at a Best Buy retail store location, please take your original receipt and the Product to any Best Buy store. Make sure that 
you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased 
the Product from a Best Buy online web site (www.bestbuy.com or www.bestbuy.ca), mail your original receipt and the Product to the address listed 
on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original 
packaging.
To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY. Call agents may diagnose and correct the issue over 
the phone.

Where is the warranty valid?

This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the 
country where the original purchase was made.

What does the warranty not cover?

This warranty does not cover:

Food loss/spoilage due to failure of refrigerator or freezer

Customer instruction/education

Installation

Set  up  adjustments

Cosmetic damage

Damage due to weather, lightning, and other acts of God, such as power surges

Accidental damage

Misuse

Abuse

Negligence

Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or 
apartment complex, or otherwise used in a place of other than a private home.

Modification of any part of the Product, including the antenna

Display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).

Damage due to incorrect operation or maintenance

Connection to an incorrect voltage or power supply

Attempted repair by any person not authorized by Insignia to service the Product

Products sold “as is” or “with all faults”

Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)

Products where the factory applied serial number has been altered or removed

Loss or Theft of this product or any part of the product

Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an area smaller than one tenth 
(1/10) of the display size or up to five (5) pixel failures throughout the display. (Pixel based displays may contain a limited number of pixels that 
may not function normally.)

Failures or Damage caused by any contact including but not limited to liquids, gels or pastes.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE 
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, 
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO 
OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT 
LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN 
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY 
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE 
LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY 
FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.

Summary of Contents for NS-HF2003






















Reviews: