www.insigniaproducts.com
16
60" Espresso TV Stand
Attaching the drawer fronts and drawer supports.
You’ll need
1
On the outside of the drawer, attach the bottom drawer support (
17
) to the back drawer panel (
13
) with two wood
screws 4 × 38 × 8 mm (
I
).
2
Insert four small cam locks into the cam lock holes on the left drawer panel (
14
) and the right drawer panel (
15
). Make
sure that the cam locks face the cam screw holes.
3
Put a drop of glue in the three dowel holes on the front drawer panel (
18
).
4
Make sure that the groove on the front drawer panel aligns with the groove on the bottom drawer panel, then press
them together.
5
Tighten the cam screws.
6
Repeat these steps for the other drawer.
Attaching the drawer handles.
You’ll need
1
Align a handle (
N
) with the holes in the center of the front drawer panel (
18
).
2
From the inside of the drawer, secure the handle with two machine screws 4 × 21 × 8 mm (
O
).
3
Repeat these steps for the other drawer.
17
Bottom drawer
support (2)
18
Front drawer panel (2)
I
4 × 38 × 8 mm screw (4)
Phillips screwdriver
A
Glue (1)
Flat blade screwdriver
F
Small cam lock (10)
N
Handle (2)
O
Machine screw
4 × 21 × 8 mm (4)