14
NS-42L780A12/NS-46L780A12/NS-55L780A12 Insignia 42"/46"/55" LCD HDTV, 1080p
www.insigniaproducts.com
Connecting an antenna or cable TV (no box)
To connect an antenna or cable TV (no box):
1
Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2
Connect a coaxial cable to the
ANT/CABLE
jack
on the back of your TV and to the antenna or
cable TV wall jack.
3
Plug your TV’s power cord into a power outlet,
then turn on your TV.
4
Go through the setup wizard on page 21.
Connecting a DVD or Blu-ray player
Using HDMI (best)
To connect a DVD or Blu-ray player using HDMI:
1
Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2
Connect an HDMI cable (not included) to an
HDMI
jack on the back or side of your TV and to
the
HDMI OUT
jack on the DVD or Blu-ray
player.
3
Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the DVD or Blu-ray
player.
4
Press
INPUT
to open the
Input
Source
list.
5
Press
S
or
T
to highlight
HDMI 1
,
HDMI 2
, or
HDMI 3
, then press
ENTER
.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
Back of TV
Coaxial cable
Note
You can also press
HDMI
repeatedly to select the
DVD or Blu-ray player.
Back of TV
DVD or Blu-ray player