Insignia NS-42L780A12 User Manual Download Page 16

Page: 16 / 60

NS-42L780A12/NS-46L780A12/NS-55L780A12 Insignia 42"/46"/55" LCD HDTV, 1080p

www.insigniaproducts.com

Using DVI (same as HDMI but requires a sound

connection)

To connect a cable or satellite box using DVI:

Make sure that your TV’s power cord is

unplugged, and all connected equipment is

turned off.

Connect the incoming cable from the cable wall

jack to the cable-in jack on the cable box.

Connect an HDMI-DVI adapter (not included) to

one end of an HDMI cable (not included).

Connect the HDMI-DVI adapter to the

HDMI 1

jack on the back of your TV and to the

DVI OUT

jack on the cable or satellite box.

Connect a 3.5 mm audio cable (not included) to

the

PC/DVI AUDIO IN

jack on the back of your

TV and to the

AUDIO OUT

jack on the cable or

satellite box.

Plug your TV’s power cord into a power outlet,

turn on your TV, then turn on the cable or

satellite box.

Go through the setup wizard on page 21.

Using component video (better)

To connect a cable or satellite box using

component video:

Make sure that your TV’s power cord is

unplugged, and all connected equipment is

turned off.

Connect the incoming cable from the cable wall

jack to the cable-in jack on the cable box.

Connect a component video cable (included) to

the

Y-VIDEO

, and

jacks on the side of

your TV and the component video out jacks on

the cable or satellite box.

Connect an audio cable (included) to the

and

audio jacks on the side of your TV and to the

audio out jack on the cable or satellite TV box.

Plug your TV’s power cord into a power outlet,

turn on your TV, then turn on the cable or

satellite box.

Go through the setup wizard on page 21.

Note

A DVI device must be connected to the

HDMI 1

jack.

If you connect a DVI device to another

HDMI

jack,

you will not hear audio.

Note

When you connect the audio using the

PC/DVI

AUDIO IN

jack, the audio output is analog.

Cable or satellite box

Back of TV

HDMI

e wit

I-D

apt

5 m

o c

abl

Note

When you connect the audio using the

and

audio

jacks, the audio output is analog.
You can connect the video to the component video

jacks and connect the audio to the digital audio jack

to get digital audio output.

Side of TV

o c

Audi

o c

able

Cable or satellite box

Summary of Contents for NS-42L780A12





























































Search results

Summary of Contents for NS-42L780A12

Reviews:

Insignia NS-42L780A12, User Manual, Page: 16 / 60

Search results

Summary of Contents for NS-42L780A12

Reviews: