www.insigniarange.com
Last Modified: 08/02/2018
20
Ozone (o3)
Unscrew the chrome pepper pot end and drop
the white box upside down into the rear hole as
shown in the image. Now from the inside of the
shower re
-
attach the chrome pepper pot end
and tighten.
Monsoon Head
Attach the grey hose from your valve to the inner black tube using PTFE
tape (please note this only needs to be hand tight.
Over tightening will snap/damage the inner black tube)
Thermostatic Probe
Insert the chrome sleeve into the hole situated below
the control panel and secure in place with the retaining
nut. Insert the rubber grommet into the sleeve and push
the probe through from the rear of the cabin ensuring
the probe protrudes no more than 6mm. Place a small
amount of silicone behind to fully secure in to place.
6mm
