www.insigniarange.com
Last Modified 08/02/2018
21
Thermostatic Probe
Insert the probe into the hole situated below the
control panel roughly 6mm into the cabin and
run clear silicone around the rear side of the
probe
Ozone (o3)
Unscrew the chrome pepper pot end and drop the white box upside down into the rear
hole as shown in the image. Now from the inside of the shower re
-
attach the chrome
pepper pot end and tighten.
Monsoon Head
Screw the threaded tube in to the top of the
monsoon shower head and pass it up through
the light diffuser and through the hole in the
shower roof. Secure in to position with the hex
nut. Next Attach the grey hose from your
shower valve to the threaded tube using PTFE
tape (please note this only needs to be hand
tight. Over tightening will snap/damage the
tube)
