www.insigniarange.com
Last Modified 08/02/2018
14
Step 2
Attach the uprights to the curved rails using the
ST20
screws. The screw should pass
through the outer holes, but if it doesn
’
t the core out the outer hole to enable the
screw to pass and connect the framework.
(Rail with Insignia logo at the top)
The uprights have the cut
-
out located at the top to allow the fitting of the roof, so make
sure you connect the frame with the cut
-
out located at the top.
Step 3 (
RubberGum
)
You can jump forward and do step 4 now if you wish and return here after to apply the
RubberGum.
Apply RubberGum around the tray to seal the back panels to it. Also apply around the
curve to seal the framework to the tray as well. You should have placed the three
back panels and be happy with the alignment, as well as the framework you
connected in step 2 to know exactly where the RubberGum should be applied.
