With all now complete as the above picture you need to fit the
glass front fixed panels.
Taking one of these, easy to identify because they are flat with no
holes in. Fit the sealing trim to one long side of the glass. Note. The
sealing trim may be in one length so carefully measure and cut ac-
cordingly. To hold in place we have used clear silicone in picture
but this is not a critical instruction and can be completed dry
Sealing trim being placed on glass
Now carefully push the trim you have just fixed on the glass into
the channel supplied in the straight end column. Press home firmly
until completely “home.”
For the latest fitting instructions please visit
www.insigniarange.co.uk
Above shows glass in channel neatly pressed fully in place.
Repeat same procedure the other side.
You now need to fix the glass in place. Take 4 x offset clips and
screw each into holes provided in both top and bottom curves.
Two in top and two in bottom.
For the latest fitting instructions please visit
www.insigniarange.co.uk
21 22
