insigniarange.com
Last Modified: 23/01/2014
14
Step 10
Insert remaining upright to the left of the curved glass panel. Drill and screw this
into position using the
ST14
and once fixed slide the flat rubber glass seal into this
newly fitted upright on the inside (as of the red line in the image)
Please note, ensure you drill no deeper than 5mm
Step 11
Pierce through the holes using a screwdriver to show pre-cut holes in the
glass as indicated in the image. Now using the chrome “L” brackets, fix these to the
glass panels using the provided nuts and bolts (
B22
) please ensure the bolt goes
through the plastic cover holder (
PCH13)
first
Align the shower panels until you are happy with the sitting of these and now using
the
ST25
screws, screw the brackets to the tub
Now place the Chrome cover caps (
CPC16
) onto the cover holders (
PCH13
)
