insigniarange.com
Last Modified: 23/01/2014
11
Step 5
Next using the angled upright, lock this to the rear squared glass panel by
following the position shown in the image marked
“1”
Now move the angled upright in the direction as shown in image
“1”
until this
locks into place as of image
“2”
1
2
1
2
1
2
Step 4
Apply silicone to the angled front glass and now lock the front angled glass
panel to the side glass panel by following the position shown in the image
marked “
1
”
Once you have met the back panel inside the front upright as per the close
up image walk the panel around to the position shown in the image
marked “
2
”