36
Step 5.
Attach the Snap-on Camera
Module into the Dome Camera
Housing,
and screw the
Module-fastened Screw tightly
with the screw driver to secure
the Camera Module.
Step 6.
Plug-in the connectors to their
corresponding
ports. Then
adjust the cable lines and twist
in the cable gland body to the
side conduit entry. After the
cable gland body is in, fasten the
thread-lock sealing nut until the
cable is completely covered.
After the above steps are completed, please refer to section
Hard Ceiling
installation
Æ
Step 13~18 for the remaining steps to complete the camera
installation.
