17
Step 4:
Attach the Camera Housing/ Plate’s
base to the In-Ceiling Mount’s top
plate, aligning the camera’s rear cable
entry with the entry hole on the
In-Ceiling Mount’s top plate.
Align the three Captive Screws with
the mating screw holes on the Camera
Housing/ Plate’s base. Then tighten
the three Captive Screws as shown in
the figure.
Step 5:
Position the supplied adhesive-backed
Ceiling Sticker (Diameter: 176 mm)
onto the ceiling where the Camera will
be mounted, and cut the ceiling hole
using the template as a guide.
