Incorrect tether placement
Correct tether placement
Pre-installation
1. Unscrew the protective shield over the SIM slots using a Phillips-head screwdriver.
2. Use the included SIM tool to insert a Nano 4FF SIM card into the appropriate SIM slot.
Be careful to not use excessive force.
3. Reattach the protective shield cover to a torque of 0.49 Nm (0.36 ft/lb), making sure
the tether passes through the hole of the rear housing and is not bent or bunched.
NOTE:
This device supports only Nano SIM cards.
WARNING!
If the tether is bunched, it could prevent the compartment from being effectively sealed.
3
