NVS440 User’s Guide
-
-
-
- 9
9
9
9 -
-
-
-
and B, are provided.
Alarm Input
: The 4 port alarm sensor input connections provides external alarm sensors such as infrared,
heat, or magnetic sensors.
Power Connector
: Accepts power of 12VDC and 3A
2.4. PC Requirements
Audio/Video monitoring and recording can be achieved with the use of NVR100 Software program running on a
PC. The Minimum PC requirement follows:
Minimum
Recommended
CPU
*
Pentium III 700
Pentium IV 1.8G above
Memory
128 MB
256MB or more
Operating system
**
Windows 98 SE.
Windows 2000 or later
Web browser
Internet Explorer 5.0
Internet Explorer 5.0 or later
Video Resolution
1024 X 768
1600 X 1200
Network
10 Base-T Ethernet
10/100 Base-T Ethernet
* CPU: Faster CPU is recommended to avoid unexpected delay in multi-channel real time video streaming
** Operating Systems supported : Windows 98 Second edition,
Windows NT Workstation 4.0 (SP 5.0 OVER)
Windows 2000 Professional
Windows XP Professional / Windows XP Home Edition
2.5 Quick Installation Guide
Brief information for rapid installation is provided in this section. For more detailed information you are
recommended to refer to pertinent documentations provided with the product or refer to Inscape Data’s home
page (
http://www.InscapeData.com
).
1. Install “IP installer” and “NVR100 Software” on your PC.
Detailed information for installing these programs can be found in
[
IP-Installer User’s Guide]
and
[
NVR100 Software User’s Guide]
,
respectively.
2. Assign an IP address to NVS440 via the IP installer software.
Identify the type of the network environment and set up an IP address accordingly. Detailed process of
setting up the IP address can be found in
[
IP-Installer User’s Guide]
.
If the network type is xDSL or
Cable modem you will need supplementary information provided by your ISP.