NVS440 User’s Guide
-
-
-
- 14
14
14
14 -
-
-
-
3.3. Connecting to Cable Modem
1. Apply power and connect the PC and NVS440 together via the crossover cable provided with the system.
2. Setup network parameters by running “IP-Installer”. (Refer to Figure 6).
NVS440
Figure 3-4. Direct connection using crossover LAN
3. Remove the crossover cable and connect the NVS440 to the network using standard LAN cable as
shown in Figure 3-5. Check if you can receive video data when connecting to NVS440 using the viewer
program.
NVS440
Figure 3-5 Connecting the NVS440 to a Cable Modem
In most cases when connecting the NVS440 to a xDSL Modem, a standard Ethernet
network cable is required. But since a few xDSL Modems uses crossover connections,
please verify the interface with your Modem manufacturer.
In most cases when connecting the NVS440 to a Cable Modem, a standard Ethernet
network cable is required. In some cases a crossover connection may be needed.
Please verify the interface with your Cable Modem manufacturer.
Regular LAN cable
or crossover cable