NVS440 User’s Guide
-
-
-
- 32
32
32
32 -
-
-
-
"
Bootloader Upgrade
: Upgrade the bootloader installed in the server via the network.
"
FPGA Code Upgrade
: Upgrade the FPGA software in the server via the network.
"
Add PTZ File
: Add a new PTZ descriptor via the network.
"
Factory Default Setting
: Re-initialize NVS440 to factory default state.
""""
NOTE: To apply Factory Default Setting, you should reset the system.
"
System Reset
: Perform remote reset by clicking the “CONFIRM” button.
""""
NOTE: To apply the upgraded S/W, you should reset the system after system S/W upgrade.
Once the NVS440 is re-initialized to factory default state, it should be set-up
again using IP-Installer.
All users logged on to the NVS440 will be disconnected upon reset. NVS440
does not
resume the connections automatically. The users must re-connect to the server
manually
.