SB3000 & BR3000 Series User
’
s Manual
`
Rev. 1.1 (July, 2012)
83
unpredictable when mixing configurations from different type devices.
5.13.6 Device Maintenance
The controls in this section are dedicated for the device maintenance routines: rebooting, resetting,
generating of the support information report.
Reboot:
activate Reboot control in order to initiate full reboot cycle of the device. Reboot effect is the
same as the hardware reboot which is similar to the power off - power on cycle. The system
configuration is not modified after the reboot cycle completes. Any non-applied changes will be lost.
Reset to Defaults:
activate Reset to Defaults control in order to initiate reset the device to factory
defaults routine. Reset routine initiates system Reboot process (similar to the power off - power on
cycle). The running system configuration will be deleted and the default system configuration (all the
system settings with no exception) will be set.
After the
Reset to Defaults
routine is completed, the device system will return to the default IP
configuration (192.168.1.20/255.255.255.0) and will start operating in Station-Bridge mode. It is highly
recommended to backup the system configuration before the Reset to Defaults is initiated.
Summary of Contents for AirEther BR3000 Series
Page 35: ...SB3000 BR3000 Series User s Manual Rev 1 1 July 2012 35 3 6 2 Forward Reflection 3 6 3 VSWR...
Page 36: ...SB3000 BR3000 Series User s Manual Rev 1 1 July 2012 36 3 6 4 3 6 5 E Plane Field Patterns...
Page 49: ...SB3000 BR3000 Series User s Manual Rev 1 1 July 2012 49...
Page 65: ...SB3000 BR3000 Series User s Manual Rev 1 1 July 2012 65...
