SB3000 & BR3000 Series User
’
s Manual
`
Rev. 1.1 (July, 2012)
75
5.11 VLAN Tab
This setup lets you create virtual local network connection through the device Ethernet only and over
wireless connections.
By default
VLAN
mode is disabled and checked on
No VLAN
5.11.1 VLAN Switch
To setup VLAN network check on
VLAN Switch
To add a Tag VLAN ID for Ethernet port, type in the ID number select
Tag
and click
Add
To add a Tag VLAN ID for MAIN wireless SSID, type in the ID number select
Tag
and click
Add
To add a Tag VLAN ID for VAP1 wireless SSID, type in the ID number select
Tag
and click
Add
To add a Tag VLAN ID for VAP2 wireless SSID, type in the ID number select
Tag
and click
Add
To add a Tag VLAN ID for VAP3 wireless SSID, type in the ID number select
Tag
and click
Add
*** Warning:
Adding a Tag VLAN ID to device interface port can cause lost of connection to
device web manager if the PC ethernet port or wireless connection do not have a
Tag VLAN ID or do not have the same Tag VLAN ID setup in device.
If this happened, use the device Reset button to clear the config and reconfigure.
Refer Reset button operations section.
Similarly, to add an untag VLAN ID enter the ID number and select
Untag
and click
Add
Refer to
Appendix V
for VLAN setup examples.
Summary of Contents for AirEther BR3000 Series
Page 35: ...SB3000 BR3000 Series User s Manual Rev 1 1 July 2012 35 3 6 2 Forward Reflection 3 6 3 VSWR...
Page 36: ...SB3000 BR3000 Series User s Manual Rev 1 1 July 2012 36 3 6 4 3 6 5 E Plane Field Patterns...
Page 49: ...SB3000 BR3000 Series User s Manual Rev 1 1 July 2012 49...
Page 65: ...SB3000 BR3000 Series User s Manual Rev 1 1 July 2012 65...
