Inscape Data AirEther AP11, User Manual, Page: 28 / 31

Version 1.0.0
52
B-1-8 Wireless LAN (as shown in Table B-8)
Parameter Description Default Value
Regulatory Domain
Define the regulatory domain to
Which this NIC may be
deployed
1
Channel
The operating radio frequency
channel for the AP11
11
RTS Threshold
Set RTS (Request To Send)
threshold value
250
Fragmentation
Threshold
Set fragmentation threshold
value
1600
SSID
Wireless LAN service area
identifier of the AP11 (case
sensitive)
wireless
Station Name Shows the name of the AP11 ap
WEP
Enable or disable 64-bit WEP
(Wired Equivalent Privacy) key
to encrypt data
Disable
Default Key
Select a WEP key to encrypt
each frame transmitted from
the radio using one the of the
Keys from the Key Panel
1
Key Panel
When you use WEP to
communicate with the other
wireless clients, all the wireless
devices in this network must
have the same encryption key
or pass phrase.
Note: each key must consist
of hex digits, it means that
only digit 0 -9 and letters A-F
are valid entries. If entered
incorrectly, program will not
write keys to a driver.
Table B-8
Version 1.0.0
53
B-1-9 Bridging (as shown in Table B-9)
Parameter Description Default Value
Bridging Function
Enable or disable bridging
Function
Enable
IP Address
IP Address of the AP11 when in
Bridging mode. The user can
use a LAN attached (wired or
wireless) computer to configure
the AP11 through using a web
browser or telnet program on a
LAN attached computer.
192.168.2.1
Subnet Mask
Consists of four sets of digits
that help divide a network into
sub-networks and simplify
routing and data transmission
255.255.255.0
Operation mode
Enable or disable the operation
mode
Enable
Enable
Disable
Disable
MAC Address
MAC address to be considered
in forward/filter policy
00-00-00-00-00-00
Interface
Select Filter(always block the
frames), Forward(always
forward the frames) or
Dynamic(forward the frames if
the MAC address exists) to the
corresponding interface
1. Filter
2. Filter
3. ---
4. ---
Table B-9