Version 1.0.0
30
3.8 Configure Bridge
1. Click
Advance Config
and select the
Bridging,
and then click
Enable
for
Bridge Function
as shown in
Figure 3-4
. In the
Bridging
Parameter
window, enter the
IP Address
(default is
192.168.2.1
) and
Subnet Mask
(default is
255.255.255.0
) that are suitable for your
network domain.
2. You can specify the MAC address of a Wireless/Ethernet client. All
MAC entries in the MAC address tables have the configuration option
as Permitted, Blocked, or Learning mode. In this menu, you can also
click
ADD, DELETE, MODIFY
button to maintain this MAC address
table.
3. Click
FINISH
at the bottom of this page to complete the modification of
this page.
Version 1.0.0
31
3.9 Configure SNMP
1. Click
Advance Config
and select the
SNMP Community
page. This
page (as shown in
Figure 3-17
) will present the current accessible
SNMP communities and Read/Write privilege. Click
FINISH
at the
bottom of this page to complete the modification.
Figure 3-17
2. Click
Advance Config
and select the
SNMP Trap
page (as shown in
Figure 3-18
). In this page, you can specify the
SNMP Trap host
and
correspond
SNMP Trap Community
in this page. Click
FINISH
at the
bottom of this page to complete the modification of this page.