Version 1.0.0
20
3.2.3 Configure the AP11 as a Router with dynamic IP
address Ethernet
Configure TCP/IP parameters
1. Click
Advanced
Config
,
select
Bridging
,
and then click
Disable
for
Bridge Function
as shown in
Figure 3-4
. After that, click
FINISH
at the
bottom of this page to complete the modification of this page.
2. Click
Basic Config
,
select
Interface
(as shown in
Figure 3-7
),
in this
page, you can click radio button and enter
MODIFY
to choose which
interface you want changed. (as shown in
Figure 3-8
).
In interface 1, Wireless interface, is
Active.
Enter the
Wireless
interface IP
(
default is 192.168.1.1
) and
Wireless interface Net Mask
(
default is 255.255.255.0
) that are suitable for your wireless network.
In interface 2, Ethernet interface, is
Active.
parameters will obtain
automatically by DHCP from your network environment.
Click the
OK
button to return to the
Interface Parameter
window.
Finally, you need to click
FINISH
at the bottom of this page to complete
the modification of this page.
3. Click
Basic Config
,
select
DHCP
(as shown in
Figure 3-10
)
and apply
the DHCP client service running on interface 2 (Ethernet interface),
After that, click
FINISH
at the bottom of this page to complete the
modification of this page.
Version 1.0.0
21
3.2.4 Configure the AP11 as a Router with static IP
address Ethernet
Configure TCP/IP parameters
1. Click
Advanced Config
,
select
Bridging
,
and then click
Disable
for
Bridge Function
as shown in
Figure 3-4
. After that, click
FINISH
at the
bottom of this page to complete the modification of this page.
2. Click
Basic Config
,
select
DHCP
(as shown in
Figure 3-10
)
and make
sure the DHCP client service is
Disable
. After that, click
FINISH
at the
bottom of this page to complete the modification of this page.
3. Click
Basic Config
,
select
Interface
(as shown in
Figure 3-7
),
In this
page, you can click radio button and enter
MODIFY
to choose which
interface you want to change (as shown in
Figure 3-8
).
In interface 1, Wireless interface, make sure interface status is
Active.
Enter the
Wireless interface IP
(
default is 192.168.1.1
) and
Wireless
interface Net Mask
(
default is 255.255.255.0
) that are suitable for your
wireless network.
In interface 2, Ethernet interface, make sure interface status is
Active
,
and specify the
Ethernet
IP address
(
default is 192.168.2.1
) and
Ethernet
Net Mask
(
default is 255.255.255.0
) of the Ethernet
interface.
Click the
OK
button to return to the
Interface Parameter
window.
Finally, you need to click
FINISH
at the bottom of this page to complete
the modification of this page.
4. Click
Basic Config
, and then select
System
as shown in
Figure 3-9
. In
the
System Setup
page, specify the
Default Route
(
Default is
192.168.2.254
) as the IP Address of the ADSL/Cable modem
connected to the AP11 or the IP Address of the Gateway in your LAN
environment, and Specify at least one IP address of the
DNS
parameter
(
Default DNS server 1 is 192.168.2.254
) provided by your
ISP in the DNS server parameter and then click
FINISH
button at the
bottom of this page to complete the modification of this page.