TB-FMCH-HDMI2 Hardware User Manual
34
Rev.1.05
5.6. FMC Connector
The FMC connector connecting to the High-Pin Count uses
SAMTEC’s ASP-134488-01.
Power to the TB-FMCH-HDMI2-TX is supplied from a +12V on the main board.
An external power source can also be used.
Table 5-2 shows JP3 jumper setting for power supply.
Table 5-2 JP3 Jumper Setting
No
Purpose
Silk
Jumper Setting
1
FMC Connector
12VIN_SEL
JP3: 1-2 short
2
External Power Source
12VIN_SEL
JP3: 2-3 short
The following test pin is used to connect an external power source.
TP14: 12VIN