InPower LLC
8311 Green Meadows Drive
Lewis Center, Ohio 43035
740-548-0965
www.InPowerLLC.com
© Copyright 2014 InPower LLC
ITM150 Owners Manual
Page
2 of 8
Document: OM-175
Version Code: B
Date: Feb. 28, 2014
Date: May 27, 2014
3. Installation Procedures
3.1 Safety Precautions
This interlock product has been designed and manufactured to meet the intended application requirements and
specifications. Any modifications to the product or to the installation procedure can be dangerous and will void
InPower’s warranty.
• Read and understand the instructions in this manual and other manuals before starting the installation.
• Make sure that the vehicle battery power is disconnected during installation of the Interlock and lift systems.
• Reconnect the battery when the system installation is complete.
• Wear appropriate safety equipment, such as protective eyeglasses, face shield and clothing when installing
equipment and handling the battery.
• Be careful when working near a battery. Make sure that the area is well ventilated and that there are no
flames near the battery. Never lay objects on the battery that can short the terminals together. If battery
acid gets in your eyes, immediately seek first aid. If acid gets on your skin, immediately wash it off with
soap and water.
3.2 Getting Started
This manual provides instructions for installing the InPower Model ITM150 Interlock System in the RAM Promas-
ter vans with gasoline engines and with a FMVSS compliant, public use (commercial) platform lift. It is important
that you follow these instructions carefully and contact InPower if you need assistance or more information.
Note that product technical documents are available on InPower’s web site.
This interlock system installation requires additional parts and materials that are not supplied with the interlock
product. Identify all required parts before starting the installation and ensure that these items are the correct
type and quality.
Inspect the interlock product and all other components for damage before starting the installation. Do not per-
form the installation if any problems exist.
Determine the type of interlock interface required for the platform lift. This interlock system provides a +12 volt
@ 1.8 amps Enable Lift output to allow the platform lift to be operated. If the lift system is not compatible with
this interface signal you must take the necessary actions to adapt the lift system interface to the interlock sys-
tem’s interface. Refer to the lift manufacturer’s installation instructions for further details.
The recommended mounting location for the ITM150 interlock control module is in the center console below the
shifter, due to the proximity of the wiring connections.
The unit must not be located in the engine compart-
ment or any location that is not protected from the environment.
WARNING
!
WARNING
!
