TECHNICAL DOCUMENTATION
3
www.inpower-sys.com
1IPSE1A33-60
P
r
e
l
iminar
y
S
AFETY
N
OTICE
1.
Prior to installation and commissioning please read this document thoroughly.
The driver may only be used for the purposes determined by the manufacturer. Unauthorized alterations
and use of spare parts and accessories not recommend by the manufacturer of the driver can cause fi re,
electric shock and injuries.
It must be prevented that children and the general public have access to or come into contact with the
installed driver!
This document has to be at the disposal of all users, developers and qualifi ed personnel who are to work
with the driver.
If measurements and tests on the live device have to be carried out, then the regulations of the Safety
Code VBG 4.0 are to be observed, in particular § 8 “Admissible deviations during work on live parts“.
Commissioning is prohibited if there is visible damage
•
by inappropriate handling or transport.
Contact while uninstalled is permitted only with ESD
•
protection.
Install only without supply voltage.
•
Use only suitable electronic devices.
•
Always keep suffi
cient safety distance during commis-
•
sioning when protective housing is not closed.
Contact under live condition is strictly prohibited.
•
CAUTION: All handling with high voltage is at the risk of
•
one’s life. Defi nitely comply with the respective safety
regulations!
Work after turn-off is not admissible until the absence
•
of supply voltage has been verifi ed.
During work after turn-off , it must be observed that
•
components heat up during operation. Contact with
these can cause burns.
The drivers are mounted electrically and mechanically
•
close onto the IGBT module using screws. The mechan-
ical strength has to be verifi ed by the user and, if neces-
sary, assured with appropriate tests.
Any handling of drivers is subject to the specifi cations
•
for protecting electrostatic-sensitive devices accord-
ing to the valid international standard (e.g. IEC 747-1,
EN 100015). When ignoring these specifi cations, both
IGBTs and drivers may be destroyed or damaged.
