InPlay Xstreamer, Instruction Manual

Page: 20 / 22

TROUBLESHOOTING
1. No signal on the HDTV Screen

Check if the HDMI cable is correctly connected.

Check if you have selected the correct HDMI input on your HDTV.
2. Cannot turn on your X- Streamer

Check if the power connector is completely plugged into the DC socket of your X- Streamer

Check if the power supply is correct (12V, 2A).
3. Cannot connect to network

Make sure the network cable is correctly connected and the Ethernet works well.

Make sure Wi-Fi network is connected and the security key for the network is correct.

Make sure you select the correct IP address settings.
4. Remote control does not respond.

Make sure the batteries are working

Make sure nothing is blocking the IR receiver
5. Some HDTVs cannot display the entire picture.

Make sure in the settings your HDTV display is set to automatic
6. HDMI cannot detect the signal output

Make sure that your TV is set to the HDMI input.

Unplug the HDMI cable, and connect it again.

Turn your TV off and back on
7. No audio output or the volume is low

Check if the speakers or the amplifiers work properly.

Check the volume status of your X- Streamer

Check if the AV cables are well connected.

Check if your X- Streamer has been muted.
8. Can’t download video/ audio/ pictures etc., and shows “SD card is full”

Please go to Explorer/internal Flash/download to delete some files for more space. Or
you can go to setting/storage to erase storage to clear all of the files, at this point you will
need to restart the Device
Remark: Please make sure that you save all of the important Video, Audio or Pictures
before erasing anything.
- 20 -