Inpax X-7100, User Manual, Page: 15 / 19

15
Advanced Operation
6.1 Record Manager
Move cursor to “ Record Manager ” and press [OK] button to enter in its setup interface. The record
time, capacity and format will be displayed in the menu. Find further operation according to screen.

Lock : Press [GREEN] button to lock recorded video. Password will be needed to open locked
recorded video.

Delete : Press [BULE] button to delete recorded video. Please operate according to screen.

Rename : Press [RED] button to rename the recorded video. Please use navigation buttons and
numeric buttons to input. Save according to screen.
Notes
1. Press [PVR] button to shift to “Record Manager” interface directly.
2. Use [CH▲/▼] buttons to select recorded video and press [OK] button to play. It will back to “Record
Manager” interface automatically when the video is finished or press [EXIT] button.
TIPS

Press [PLAY] button to have a preview.

Press [OK] button to watch recorded video by full screen.

Press [PAUSE] button to make a pause while playing.

Press [STOP] button to stop playing.

There are 5 options, ×2, ×4, ×8, ×16, ×24 in “Fast Backward” and “Fast Forward” mode.

There are 3 options, ×1/2, ×1/4, ×1/8 in “Slow Forward” mode.

Press [INFO] button twice to open “HDD Record List” and press [OK] button to watch in full screen
while playing,
6.2 HDD Information
Move cursor to “HDD Information” and press [OK] button to view information of plugged USB device.
6.3 DVR Configuration
Move cursor to “DVR Configuration” and press [OK] button to enter in its setup interface.

Time Shift: ON/FF

Time shift to Record : ON/OFF

Record Type: TS(Transport Stream)/PS(Program Stream)

Record Subtitle: ON/OFF
Tips for record real-time channel program.

Connect USB device with receiver.

Turn on “Time Shift” mode.

Press [PAUSE] button to stop the TV program and the receiver will start recording as much as
the USB device capacity is. Press [PLAY] button to continue watch the program from the
stopped.

Use [F.REW] and [F.FWD] buttons to forward or backward of recorded program. There are 5
options, 2
、
×4
、
×8
、
×16 and ×32.
 Press [INFO] button twice to enter in “HDD Record List” interface, choose one of it and press
[OK] button to watching by full screen.

The recorded program will be eased automatically once channel has been shifted.
Tips for record video
 Connect USB device with receiver.
 Press [REC] button to start recording program.
 Press [STOP] button to stop recording.

The receiver will start recording as much as the USB device capacity is.

Recorded video will be stored in the disk.
6.4 Jump
Move cursor to “Jump” and press [OK] button to enter in its setup interface. There are 5 options
which are listed below.

30sec
 1min
 5min
 10min
 30min
Note: “Jump” function is only activated to non-real-time program. Use [VOL◄/►] buttons to operate.
Tips
 While using [VOL◄/►] buttons
The screen will jump to the time as set, requiring [OK] button to confirm the jump.