Inpax X-7100, User Manual, Page: 13 / 19

13
Advanced Operation
3.9 Other
Move cursor to “Other” and press [OK] button to enter in its setup interface.

LNB Power: OFF/ON

Channel Play Type: Free/Scrambled/All

Beeper: OFF/ON

Sleep Timer: OFF/10/30/60/90/120/180 Min

Auto Standby: OFF/10/30/60/120/180 Min
4. Tools
Move cursor to “Tools” and press [OK] button to enter in its submenu. There are 7 options which are
listed below.

Information

Factory Setting
 S/W Upgrade by OTA
 Upgrade by USB

Save to USB

USB

Remove USB Device Safely
4.1 Information
Move cursor to “Information” and press [OK] button to display information of the device.
4.2 Factory Setting
Move cursor to “Factory Setting” and press [OK] button to load factory default. The default password
is “0000”.This step must be done at first time use or after upgrade. Please operate according to screen.
4.3 S/W Upgrade by OTA
Move cursor to “S/W Upgrade by OTA” and press [OK] button to enter in its submenu.

Satellite: Choose the satellite for upgrade.
 Transponder: Select the transponder for upgrade.

Frequency: Select the frequency of upgraded channel.

Symbol Rate: Select the symbol/ code rate of upgrade channel.

Polarity: Select the right polarity of the Upgrade channel.

Download PID: Select the PID of the downloaded upgrade software.
 Start: Start upgrading.
NOTE: Please select corresponding item while upgrading.
4.4 Upgrade by USB
Move cursor to “Upgrade by USB” and press [OK] button to enter in its interface.
Here are the steps for upgrade by USB.
 Connect USB device with document named “*. abs”.

Enter in “USB Software Update” interface and select “All Code” mode, the update document will be
found in “Upgrade list” automatically.

Choose “START” to load the update document. “Load data” window will display the process. Please
operate according to screen.
 Press [EXIT] button to quit.
Notes:
1. Do not cut off power supply while upgrading.
2. Factory default must be loaded after upgrade.
4.5 Save to USB

Save Mode: All Code/Radioback/Defaultdb

Save File

Start: Press [OK] button to start saving.
4.6 USB
Plug USB device and enter in “USB” interface. “USB” interface is deactivated without USB device.
Press [USB] button to enter in “USB” interface directly while watching. Press [EXIT] button to quit.
MP3, JPEG and BMP formats are all supported.
Use [CH▲/▼] button to choose file and press [OK] button to enter in its submenu or play.