11
Advanced Operation
2. Installation
Move cursor to “Installation” and press [OK] button to enter in its submenu. There are 5 options
which are listed below.
Satellite List
Antenna Setup
Signal Satellite Search
Multi Satellite Search
TP List
2.1 Satellite List
Move cursor to “Satellite List” and press [OK] button to enter in its submenu. Use [CH▲/▼] buttons
to choose satellite.
Edit
: Press [RED] button to edit satellite. Please operate according to screen. Use [RED] button to
shift alpha between capitalized and small. Use [GREEN] button to delete input. Use [YELLOW]
button to confirm editor. Press [BLUE] button to cancel editor.
Add
: Press [GREEN] button add a satellite. Please operate according to chapter “Edit”.
Delete
: Use [CH▲/▼] buttons to select satellite and [OK] button to confirm selection. Press [BLUE]
to delete the selected satellite. Press [EXIT] button to quit and save according to screen.
2.2 Antenna Setup
Move cursor to “Antenna Setup” and press [OK] button to enter in its submenu. Use [CH▲/▼]
buttons to select item and [VOL◄/►] buttons to change parameters. Signal Intensity and Signal Quality
will be displayed at bottom of the window.
Satellite: Choose a satellite.
LNB Freq: Press [OK] button to select a proper LNB Frequency.
Transponder: Press [OK] button to select a transponder.
DiSEqC1.0: Press [OK] button to select a digital control port.
22K
：
Use [VOL◄/►] buttons to activate or deactivate 22K Hz tone switch.
Polarity: Use [VOL◄/►] buttons to choose a polarity voltage: Auto, H(horizontal) and V(vertical).
2.3 Single Satellite Search
Satellite: Press [OK] button to choose satellite.
FTA Only: Yes(Search the free channels only)/No (Search both free and paid channels)
Scan Channel: TV Channel/Radio/TV + Radio
Network Search: Yes/No (It is activated when “Scan Mode” is in “Preset Scan” mode.)
Scan Mode: Auto Scan/Preset Scan
Search: Start search.
2.4 Multi Satellite Search
Satellite: Press [OK] button to choose satellites for search.
FTA Only: Yes(Search the free channels only)/ No (Search all channels)
Scan Channel: TV Channel/Radio/TV + Radio
Network Search: Yes/No (It is activated when “Scan Mode” is in “Preset Scan” mode.)
Scan Mode: Auto Scan/Preset Scan
Search: Start search.
2.5 TP List (Transponder Search)
Move cursor to “TP List” and press [OK] button to enter in its submenu. Press [EXIT] button to quit.
Refer to “Satellite List” for detail operations of Edit/Add/Delete/Search.
3. System Setup
Move cursor to “System Setup” and press [OK] button to enter in its interface. There are 9 options
which are listed below.
Language
TV System
Display Setting
Local Time Setting
Timer Setting
Parental Lock
OSD Setting
Favorite
Other