Menu Operations
21
3.3
Channel Setup
When you enter the “Channel Setup” menu
you will see a screen like beside:
1.
Startup Channel: Press [OK] to enter
“Startup Channel” menu to see the
screen like showed beside:
If
you
set
of
“Boot
on
Channel” to “On” you can edit the
following two items. If the setting
is “Off” the box always starts with
the channel that was running when the box has been switched off.
On the “Mode” item you can
select either “TV channel” or
“Radio channel”.
On “Startup Channel” item
you can open the channel list by
pressing [OK]. Then you can
select the channel of you choice.
Press [OK] again to confirm.
2.
Channel Play type: Use [CH▲/▼] to
select, press [OK] to enter “Channel Play Type” menu. Here you can select
the “playing channels” as “All”, “Free”
or “Scrambled” with [Vol◄/►].
3.
If you select “Free” then all scrambled
channels will be skipped when you
change channels with [Vol◄/►].
4.
Press [Exit] to leave the “Channel
Setup” menu.
