background image

3

Safety Instructions

Dear customer,

Thank you for purchasing this DVB Terrestrial Receiver. Please read this manual carefully before

operating your product and pay close attention to the precautions which are mentioned below.

This product only can be operated where the mains supply is ~165-264V, 50Hz.

To avoid fire and electric shock, do not expose this equipment to rain or moisture.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid,

such as vases, shall be placed on the apparatus.

To reduce the chance of fire, electric shock, or annoying interference, use only the recommended

accessories.

The mains plug is used as the disconnect device, the disconnect device shall remain readily

operable

Keep not less than 5cm distances around the apparatus for sufficient ventilation.

Keep the ventilation should not be impended by covering the openings with items such as

newspapers, table-cloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like;

The label was silk-printed on the exterior of the bottom of the apparatus.

Correct Disposal of this product:

To reduce the chance of fire, electric shock, do not open the cover when it works.

This product has been manufactured to conform to the International Safety Standards.

Please peruse the following safety precautions before use it.

OVERLOADING

Do not overload a wall outlet, extension cord or adapter as this may result in fire or electric shock.

CLEANING

Disconnect the product from the wall outlet before cleaning. Do not use any aerosol products to

clean the product. Dust the outer surface with a cloth lightly dampened with water (no solvents).

CONNECTING TO ANTENNA

Disconnect the product from mains before connecting or disconnecting to antenna. Otherwise, it

may damage the product and antenna.

CONNECTING TO TV SET

Unplug the power cord when connecting or disconnecting to TV Set. Otherwise, it may damage the

product and antenna

EARTHING

The antenna cable must be earthed to the antenna system and the Earthing System must comply

with the local Electric Safety Standards.

LOCATION

The DVB-T is designed for indoor use only. Do not install the product where it may expose to bright

light or direct sunlight.

This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.

Summary of Contents for X-2004





















Reviews: