17
The recorded program will be eased automatically once channel has been shifted.
Advanced Operation
Tips for record video
Connect USB device with receiver.
Press [REC] button to start recording program.
Press [STOP] button to stop recording.
The receiver will start recording as much as the USB device capacity is.
Recorded video will be stored in the disk.
6.4 Jump
Move cursor to “Jump” and press [OK] button to enter
in its setup interface. There are 5 options which are listed
below.
30sec
1min
5min
10min
30min
Note:
“Jump” function is only activated to non-real-time
program. Use [VOL◄/►], [PREV] and [NEXT] buttons to
operate.
Tips
While using [VOL◄/►] button:
The screen will jump to the time as set, requiring [OK] button to confirm the jump.
While using [PREV] and [NEXT] button:
The screen will jump to the time as set directly.
