INOXPA PHARMAVALVE Installation, Service & Maintenance Manual Download Page 6

 

 

ED. 2009/09 / 

3.

 

Delivery and Installation 

3.1. 

 

CHECKING THE SHIPMIENT 

On receipt of the valve check to verify that it agrees with the delivery note. 
INOXPA inspects all its equipment before packing but we cannot guarantee that the goods will arrive undamaged to the user. 
For this reason, the valve and any other components received should be checked and, if found not to be in good condition 
and/or not complete the carrier should submit a report as soon as possible. Each valve has a manufacturing number engraved 
on the nameplate. Indicate the manufacturing number in all documents and correspondence.                               

 

3.2. 

 

DELIVERY AND UNPACKING 

 

 

INOXPA will not be responsible for the inappropriate unpacking of the valve and its components. 

 

3.2.1.  

 

Delivery:  

Check all the parts indicated on the delivery note. 
 

 

Complete valve. 

 

Its components (if supplied). 

 

Delivery note. 

 

Instruction manual. 

 

3.2.2.  

 

Unpacking: 

 

Remove all traces of packing materials from the valve or parts. 

 

Inspect the valve or its constituent parts for possible damage caused during transport. 

 

Avoid any possible damage to the valve and its components.  

 

3.3. 

 

STORAGE 

If the valve and/or diaphragm are not going to be assembled for immediate use, but stored for later installation, they must be 
stored in a closed area according to the following conditions: 
 

 

Temperature   

 

from 15ºC to 30ºC 

Relative humidity 

 

<60% 

Away from sunlight    

Store in opaque bags

 

 
Open-air storage of the equipment is 

NOT 

allowed. 

 

 

For valves that must be stored for a long period, the casing must be disassembled, as the diaphragm 
may become excessively deformed and/or damaged. In order to disassembly the casing, see 
paragraphs 7.1 and 7.2 of the Chapter 

Assembly and Disassembly

.  

 
 

For optimum performance of the diaphragms do not keep them in storage for more than 3 years. After this time, they may 
degrade and lose their properties.  
 
 
 
 
 
 

 

 

 

VALVULAS NEUMATICAS / AIR OPERATED VALVES 

 

NºFIGURA:     TAMAÑO: 

FIGURE NR: 

 

 

SIZE: 

 
TIPO ACTUADOR: 

ACTUATOR TYPE: 

 
PRESION DE TRABAJO:min 

 

/máx 

WORKING PRESSURE:min 

 

/max 

 
Nº FABRICACION:   

 

MODELO: 

MANUFACTURING NR.: 

 

MODEL: 

 

Serial Number 

Summary of Contents for PHARMAVALVE

























Reviews: