(0) 2018/05
4. Installation
7
4.
Installation
4.1.
RECEPTION OF THE VALVE
INOXPA will not be liable for any deterioration of the material occurred during shipping or
unpacking. Visually check that the packaging has not been damaged.
The first thing to do upon receipt of the valve is to check it and make sure that it matches the packing list.
INOXPA inspects all its equipment before packaging; however, it cannot guarantee that the merchandise
arrives to the user intact. Therefore, when receiving valves or any other item, they must be checked; if it
is found that they are not in good condition or not all the parts are present, the carrier will fill out a report
as soon as possible.
Each valve is inscribed with its fabrication number. Indicate the fabrication number on all documents and
correspondence.
4.2.
TRANSPORTATION AND STORAGE
INOXPA shall in no case be liable for improper unpacking of the valve and its components.
4.2.1.
Delivery
Check to see whether all the parts listed on the delivery slip are present:
Complete valve.
Its components (if any are supplied).
Delivery slip.
Instruction manual.
4.2.2.
Unpacking
Remove any possible traces of packaging from the valve or its parts
Inspect the valve or the parts that comprise it for possible damage incurred during shipping.
Take all possible precautions against damage to the valve and its components.
The buyer or user shall be liable for assembly, installation, start-up and operation of the
valve
Fabrication number
