(0) 2018/05
1. Safety
3
1.
Safety
1.1.
INSTRUCTION MANUAL
This instruction manual contains basic guidelines, which must be followed during installations, start-up,
and maintenance.
The information published in this instruction manual is based on updated data.
INOXPA reserves the right to modify this instruction manual without prior notice.
1.2.
INSTRUCTIONS FOR START-UP
This instruction manual contains essential and useful information for the correct handling and maintenance
of your valve.
The safety instructions detailed in this section as well as all the special measures and recommendations
included in the other sections of this manual must be observed and fulfilled. These instructions must be
kept in a safe location near the installation area.
1.3.
SAFETY
1.3.1.
Warning symbols
Danger for people in general
Danger of injury caused by moving
equipment parts.
Electrical hazard
Danger caustic or corrosive agents
Danger to the correct operation of
the equipment
Mandatory to ensure safety at the
workplace
Mandatory use of safety goggles
1.4.
GENERAL SAFETY INSTRUCTIONS
Read the instruction manual carefully before installing and using the valve. If in doubt,
please contact INOXPA
1.4.1.
Durante la instalación
The Technical specifications in chapter 8 should always be observed.
The installation and use of the valve must always be carried out in accordance with
applicable safety and health regulations.
Before putting the valve into service, check to make sure it is assembled correctly and that
the shaft is perfectly aligned. Misalignment and/or excessive forces when securing the valve
can cause serious mechanical problems with the valve.
